ISAW Camera Inc. IEXR100 Manuale Utente
Step#2. Standby
Press 'MODE' button for 2 seconds.
RC is standby to connect.
Step#3. Connect
Press 'MODE and SHUTTER' buttons together for 2 seconds.
RC starts to connect to the camera.
Step#4. Connected
RC is connected to the camera.
Step#5. Status
RC shows the status of multi camera control status.
Control number is the number of camera currently connected
Total cam is the total number of connected cameras.
Control number is the number of camera currently connected
Total cam is the total number of connected cameras.
Step#6. Mirroring
After RC is connected, LCD mirrors the camera's status.
User can monitor camera's status through RC LCD
simultaneously.
* Connection failed
WiFi connection is failed.
Goes back to standby screen.
* Exceed connection
Total number of connection is exceeded.
Disconnect the camera in order to replace the connection
* ISAW RC can control maximum 9 cameras at the same time
Disconnect the camera in order to replace the connection
* ISAW RC can control maximum 9 cameras at the same time
*Unstable connection
WiFi is connected but signal is unstable.
Check the camera's WiFi signal status
Properly disconnect WiFi connection from the camera
Check the camera's WiFi signal status
Properly disconnect WiFi connection from the camera
5. How to disconnect WiFi (De-pairing)
Steps
Image
Description
Step#1.Connected
Currently connected to the camera
Step#2. Disconnect
Press 'MODE and CAMERA' buttons together for 2 seconds.
RC starts to disconnect from the camera.
Step#4. Disconnected
RC is now disconnected from the camera.
Step#5. Standby
RC is back to standby mode.
Step#6.Connect
Other Cam
Other Cam
If there is other connected camera to the RC, it will automatically
connect to other camera.
(Camera #2 is disconnected, and RC is now connected to
camera #3)