CEI Conrad Electronic International Limited RCE-NAVIGATOR Manuale Utente

Getting The Navigator 250 Into The Air  |  17

1.  Screw the supplied clover leaf antenna (8) onto the antenna socket (20) at the rear of

2.  Use a suitable wrench to tighten it securely.

For easy storage and protection, the arms (13) and legs (12) are foldable. Refer to »Fig. 2.
1.  Losen the top knurled screw of the arm lock (14) on the arm hinge.

2.  Swing each arm fully out and secure it by tightening the knurled screw again.

3.  Fold each leg out.

 

Before storing, loosen the knurled screws, swing the arms in and fold the legs up.

 

Always fully charge the flight battery (23) before you fly.

 

Use the supplied balance charger (69018RC) to charge the flight battery. Read the

operating instructions supplied with the charger before using it.

1.  Remove  the  cover  from  the  balancer  socket  (21)  on  the  battery  and  connect  the

supplied balancer connection cable to the battery and the “3S” balancer connection on

the charger. Now, connect the flight battery to the charger by using the charging cable.

2.  Observe the indicator lights on the charger (and their labels) while charging.

3.  Replace the balancer socket cover.

Fig. 2