eResearchTechnology GmbH AM3G01 Manuale Utente
Page 10/42
Peak Flow Meter AM3 - Instructions for Use for Trial xxx
Version 00.03 • Date 04NOV2013
2.1 Handling
2.1.1 Turning the Device ON in Subject Mode
Press and hold the
button. While holding the
button, press and hold the
button. Hold both buttons for approximately 2 seconds.
2.1.2 Turning the Device ON in Investigator Mode
To turn ON the device, press and hold the
button. While holding the
button, press and hold the
button. Hold both buttons for approximately
2 seconds. After releasing the buttons the investigator password is requested.
The investigator password is distributed during the study training or is available
from the ERT Hotline.
from the ERT Hotline.
The Investigator Mode needs to be turned ON, whenever there is a need to enter
or change settings on the Peak Flow Meter or the modem.
or change settings on the Peak Flow Meter or the modem.
2.1.3 Turning the Device OFF
The device is turned OFF by pressing
.
TUTORIAL devices DO NOT STORE any data. That is why it is not possible to use
them as subject devices.
them as subject devices.
TUTORIAL devices CANNOT be changed into subject devices.
2.1.4 TUTORIAL Devices
Each site receives a “TUTORIAL DEVICE“ to train site staff and subjects on how to
operate the device correctly.
In Tutorial Mode, it is possible to have the subject simulate morning and/or
evening sessions. The site staff can also simulate administrative functions such as
dispensing the AM or closing the AM.
operate the device correctly.
In Tutorial Mode, it is possible to have the subject simulate morning and/or
evening sessions. The site staff can also simulate administrative functions such as
dispensing the AM or closing the AM.
Tutorial Device - Tutorial Session
Morning
Press arrow keys
to select your choice
Evening