CognitiveTPG LLC 0481402 Manuale Utente
28
6.3 Calibrating Media Sensor by Diagnostic Tool
6.3.1 Auto Calibration
1. Make sure the media is installed ready and media cover is closed. (Please refer to
section 3.4)
2. Turn on the printer power switch.
3. Open Diagnostic tool and set interface. (The default setting is USB)
2
1
The default interface setting is
USB interface. If USB interface
is connected with printer, no
other settings need to be
changed in the interface field.
4. Click the
“Calibrate Sensor” button.
5. Select the media type and click the
“Calibrate” button.
1
2
Note:
The M3 can only support black mark and continuous of media type.
The M3 can only support black mark and continuous of media type.