CognitiveTPG LLC 0481402 Manuale Utente
29
6.4 Setting Wi-Fi by Diagnostic Tool (Optional)
1. Make sure the media is installed ready and media cover is closed. (Please refer to
section 3.4)
2. Turn on the printer power switch.
3. Open Diagnostic tool and set interface. (The default setting is USB)
2
1
The default interface setting is
USB interface. If USB interface
is connected with printer, no
other settings need to be
changed in the interface field.
4. Select
“Wireless” tab and “Built-in wireless module” item.
5. Enter and select the new WLAN settings in the editor.
6.
Press “Set” button to set the new settings to the printer.
7. Press
“Get” button to make sure WLAN is set properly.
1
2
3
4
5
Note:
* The printer connects with the computer via USB cable or RS-232 cable, which are option.
* The printer connects with the computer via USB cable or RS-232 cable, which are option.