WUXI IDATA TECHNOLOGY COMPANY LTD. IDATA Manuale Utente

Pagina di 29
iData 95 User Manual 
- 25 - 
Fault  
Cause 
Solution 
on the iData 95. 
necessary, save the records on the host or 
increase the storage capacity by using an 
SD card. 
at a low speed.   
Too many applications are 
installed on the iData 95. 
Remove applications installed on the iData 
95. 
The scan application is not 
loaded. 
Load iScan in the iData 95. 
Reading a barcode fails. 
Check that the barcode is not defective. 
The iData 95 does not 
decode barcodes. 
The battery volume is low. 
If the scanner stops sending out laser beam 
after you turn on the switch, check the 
battery volume. 
Table 7-2 Cable troubleshooting 
Fault  
Cause 
Solution 
Charging 
fails. 
The cable is in poor 
contact. 
Replace the cable. 
Connecting the 
ActiveSync software fails.   
The cable is in poor 
contact. 
Replace the cable. 
Table 7-3 Wi-Fi connection troubleshooting 
Fault  
Cause 
Solution 
An AP cannot be 
connected. 
“Authentication fails” is 
displayed.  
The password of the WLAN device is 
incorrect.