TomTom Telematics BV L0101 Manuale Utente
8
There are two steps to setting up your LINK 105:
1. Configure a Bluetooth connection between your LINK 105 and your LINK 5xx/4xx.
1. Configure a Bluetooth connection between your LINK 105 and your LINK 5xx/4xx.
There are two ways to establish a Bluetooth connection between your LINK 105 and your LINK
5xx/4xx:
5xx/4xx:
Make sure you have properly noted and entered the Bluetooth address of your LINK 105,
which you can find on the label on the OBD-II plug.
which you can find on the label on the OBD-II plug.
2.
before you start the engine of your vehicle, otherwise the calculation of the fuel consumption may
be incorrect.
be incorrect.
Configuring a Bluetooth connection with WEBFLEET
This section describes how to pair your LINK 105 with the LINK 5xx/4xx installed in your vehicle
using WEBFLEET. You can also
using WEBFLEET. You can also
instead.
Note: Make sure your vehicle is properly fitted with a LINK 5xx/4xx according to the
2. Click Vehicles.
3. Select your vehicle from the list.
4. In the details panel on the right, click Contract/Device.
Installing your LINK 105