TomTom Telematics BV PRO202 Manuale Utente

10 

 
 

You have the following options to mount your PRO 2020:   

 

Using the adhesive tape, to stick it to a plane surface. 

 

Using the air vent mount holder. 

 

Using the TomTom universal suction mount, offered as an additional accessory (Art# 
9KZ1.001.00), for on dashboard mounting. 

 

Using any mounting accessory with a hole pattern compatible with the AMPS industry 
standard. 

 

You can use the adhesive strip to fix the PRO 2020 to your vehicle. Follow the safety instructions 
in this document. 
1.  Choose a flat surface for accurate positioning of the unit. 
2.  Clean the surface with the supplied cleaning tissue, so that the surface is oil free, dry and 

clean. 

3.  Remove the protective film from one side of the strip. 
4.  Stick the strip to the bottom side of the mounting adapter shown below. 

 

Important: Use the strip only in combination with the mounting adapter. 

5.  Remove the protective film from the other side of the strip. 
6.  Place the mounting adapter with the adhesive strip on the prepared surface. Press it gently for 

a few seconds until it sticks. 

Note: The full strength of the strip will be reached after approximately 72 hours depending 
on the temperature.