TomTom Telematics BV PRO202 Manuale Utente
9
After you have properly wired your PRO 2020 you may need to configure your TomTom LINK
device in WEBFLEET.
device in WEBFLEET.
If the output OUT of your TomTom LINK had not been configured for other usage before, it will be
automatically configured to be used for the PRO 2020.
automatically configured to be used for the PRO 2020.
To configure your TomTom LINK device to be used together with the PRO 2020, do the following:
1. Log in to
1. Log in to
2. Find your vehicle and select it.
3. In the vehicle details panel, go to the section for Contract / Device.
4. Click Configure.
5. Go to the Inputs / Outputs tab.
6. For OUT select PRO 2020 from the list.
7. Click Save.
3. In the vehicle details panel, go to the section for Contract / Device.
4. Click Configure.
5. Go to the Inputs / Outputs tab.
6. For OUT select PRO 2020 from the list.
7. Click Save.
Configuring the PRO 2020