Stec UFM 16GB SLUFM16GU2TUI-A Manuale Utente
Codici prodotto
SLUFM16GU2TUI-A
STEC™ Embedded USB Flash Module
1GB to 16GB Capacities
1GB to 16GB Capacities
USB Solid-State Flash Disk
Capacity: 1GB - 16GB
USB 2.0 Compliant
Form Factors:
Horizontal Mount
Standard 2x5 or Hirose 9-Pin
Connector
2x Planar TSOP Flash
or 2x Stacked TSOP Flash
High Reliability:
Advanced Wear-Leveling
BCH ECC Engine corrects up to
16 bits errors per 1 Kbyte
Automatic Bad Block Management
Single Level Cell (SLC) NAND Flash
Memory
Unique Serial Number
Commercial and Industrial Operating
Temperatures Available
Temperatures Available
RoHS-6 Compliant
www.stec-inc.com
SLUFMxxxU2TU(I)-y
General Description
STEC™ Embedded USB Flash Module provides non-volatile, solid-state storage
in a compact design, making it perfectly suited for embedded applications. The
standard USB 2.0 interface provides designers with a true plug-n-play storage
device, allowing for short design cycles and fast time to market.
in a compact design, making it perfectly suited for embedded applications. The
standard USB 2.0 interface provides designers with a true plug-n-play storage
device, allowing for short design cycles and fast time to market.
The embedded
USB flash module is manufactured with STEC‘s state-of-the-art,
USB 2.0 flash memory controller, providing high data reliability and endurance.
Flash management software embedded in the controller emulates a hard disk,
enabling read/write operations that are identical to a standard, sector-based hard
disk. Sophisticated wear leveling algorithms ensures greater flash endurance,
while automatic bad block management and a built-in ECC Engine ensure the
highest data reliability. Based on a BCH error correct algorithm, the ECC engine
can correct up to 16-bit errors per 1 Kbyte.
Flash management software embedded in the controller emulates a hard disk,
enabling read/write operations that are identical to a standard, sector-based hard
disk. Sophisticated wear leveling algorithms ensures greater flash endurance,
while automatic bad block management and a built-in ECC Engine ensure the
highest data reliability. Based on a BCH error correct algorithm, the ECC engine
can correct up to 16-bit errors per 1 Kbyte.
The embedded USB flash module is available with a Standard 2x5 connector
(2.54mm pitch) or a Hirose 9-pin connector.
(2.54mm pitch) or a Hirose 9-pin connector.
The embedded USB flash module with its high performance, high reliability and
low cost per megabyte is the product of choice in embedded applications, such as
Gaming, POS Workstations, Networking Equipment and Industrial PCs.
low cost per megabyte is the product of choice in embedded applications, such as
Gaming, POS Workstations, Networking Equipment and Industrial PCs.
STEC offers value-added services to OEM customers, such as customized form
factors and test solutions, custom firmware, controlled Bill of Materials, customer-
specific labeling and serialization.
factors and test solutions, custom firmware, controlled Bill of Materials, customer-
specific labeling and serialization.
Ordering Information: Embedded USB Flash Module
Part Number
Flash Placement
Capacity
SLUFM1GU2TU(I)-y
2x Planar TSOP Flash
1 GB
SLUFM2GU2TU(I)-y
2x Planar TSOP Flash
2 GB
SLUFM4GU2TU(I)-y
2x Planar TSOP Flash
4 GB
SLUFM8GU2TU(I)-y
2x Planar TSOP Flash
8 GB
SLUFM16GU2TU(I)-A
2x Stacked TSOP Flash
16 GB
Legend:
SL = STEC standard finished product
UFM = Embedded USB flash module form factor
1G/2G/4G/8G/16G = 1GB / 2GB/ 4GB/ 8GB / 16GB capacity
U2T = STEC
‗s USB flash memory controller (2
nd
Generation)
U = RoHS-6 compliant
Part numbers without (I) = Commercial temperature range (0ºC to 70ºC)
I = Industrial temperature range (-40ºC to 85ºC)
(y) = A for Standard 2x5 ( y) = C for Hirose 9-pin
connector
connector
Note: The 16GB embedded USB flash module is available with standard
connector only.
connector only.