Manualsbrain.com
  1. Manuali
  2. Marche
  3. JVC
  4. HR-J278EU
  5. Manuale Utente

JVC HR-J278EU Manuale Utente

Scarica
Pagina di 40
Filename [HRJ278EU3.fm]
Masterpage:Right
EN
 
27
* The default setting is bold in the table below.
8
B.E.S.T.
ON
OFF
You can set the B.E.S.T. (Biconditional Equalised Signal 
Tracking) system to “ON” or “OFF” (
墌
pg. 19).
8
PICTURE CONTROL
AUTO
:
Provides the optimised picture 
benefits of the B.E.S.T. Picture 
System.
EDIT
:
Minimizes picture degradation 
during editing (recording and 
playback). 
SOFT
:
Reduces image coarseness when 
viewing overplayed tapes containing 
a lot of noise.
SHARP
:
Clearer, sharper-edged picture when 
viewing images with lots of flat, 
same-coloured surfaces such as 
cartoons.
This feature helps you to adjust the playback picture 
quality according to your preference. Normally select 
“AUTO”.
NOTES:
● When you select “EDIT”, “SOFT” or “SHARP”, the selected 
mode will not change until you select another mode.
● When you select “EDIT” to dub tapes, be sure to select “AUTO” 
after you finish dubbing the tapes.
● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches 
automatically from “AUTO” to “NORM”.
8
AUTO TIMER
ON
OFF
When this function is set to “ON”, the timer is 
automatically engaged when the recorder power is turned 
off, and automatically disengaged when the recorder is 
powered back on.
NOTE:
For safety, when “AUTO TIMER” is set to “OFF”, all other recorder 
functions are disabled while the Timer mode is engaged. To 
disengage the timer, press 
#
 (TIMER).
8
O.S.D.
ON
OFF
When this function is set to “ON”, various operational 
indicators appear on the TV screen. Messages appear in 
the selected language (
墌
pg. 10 or 11).
NOTES:
● When you use this recorder as the source player for editing, be 
sure to set “O.S.D.” to “OFF” before starting.
● During playback, the operation mode indicators may be 
disturbed depending on the type of tape being used.
HRJ278EU3.fm  Page 27  Thursday, February 22, 2001  1:33 PM