JVC HR-J278EU Manuale Utente

Pagina di 40
Filename [HRJ278EU3.fm]
Masterpage:Left
28
 
EN
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.
8
POWER SAVE
ON
OFF
When this function is set to “ON”, you can reduce the 
power consumption while the recorder is turned off.
NOTES:
● During Power Save mode ...
... the front display panel will be turned off.
... the picture may be distorted momentarily when you turn on/
off the recorder.
● Power Save does not work when the recorder is in the Timer 
mode.
8
COLOUR SYSTEM
PAL/NTSC
:
To record PAL signals, or play back a 
PAL or NTSC tape.
MESECAM
:
To record SECAM signals, or play 
back a MESECAM tape.
You can play back PAL, NTSC and MESECAM tapes, or 
record PAL and SECAM* signals on this recorder. Select the 
appropriate colour system.
*  SECAM signals will be recorded as MESECAM on this recorder; 
MESECAM is the designation for tapes with SECAM signals that 
have been recorded on a MESECAM-compatible PAL video 
cassette recorder.
NOTES:
About NTSC Playback
● Some TVs shrink the picture vertically and place black bars at 
the top and bottom of the TV screen. This is not a malfunction 
on the part of either the video recorder or the TV.
● The picture may roll up and down. This can be corrected using 
the V-HOLD control found on some TVs. (This cannot be 
corrected if the TV does not have a V-HOLD control.)
● The counter and tape remaining time readings will be incorrect.
● During search, still, or frame-by-frame playback, the picture will 
be distorted, and there may be a loss of colour.
● Depending on the type of TV, the top and bottom portions of 
superimposed displays may be cut off during NTSC playback.
HRJ278EU3.fm  Page 28  Thursday, February 22, 2001  1:33 PM