JVC HR-S9400U Manuale Utente

1

2

4

5

3

6

8

0

7

9

8

SELECT D.S.T. MODE

You have three choices:
a–Select “AUTO” and the
adjustment to your VCR’s
clock will be made
according to the incoming
signal from the host
channel.
b–Select “ON” and the
adjustment will be made
based on the clock itself.
c–Select “OFF” if Daylight Saving Time doesn’t apply to
you.

Place the arrow next to your choice by pressing CH

5∞

or TIME SCAN 

5∞, then press MENU and the Semi-

Auto Clock Set screen reappears.

=AUTO

5,∞) TO SELECT

Turn the VCR off after performing the Semi-Auto Clock Set
procedure. "Auto" will appear on the front display panel
when the clock is being set. The current time will appear
automatically when the clock is set.

SELECT MODE

At the Override Auto Clock Set screen (

Z

 pg. 10), place

the arrow next to “MANUAL CLOCK SET” by pressing
CH▲▼ or TIME SCAN 

5∞, then press OK.

SET DATE, TIME AND D.S.T.

The Manual Clock Set
screen is displayed and the
month digit begins blinking.
Press the appropriate
NUMBER keys to set the
date and time (if only 1
digit, press "0" first). Press
CH▲▼ or TIME SCAN 

5∞

to set AM/PM and D.S.T.
(Daylight Saving Time). Press OK after AM/PM and D.S.T.
settings.
Set D.S.T. to "ON" to set the D.S.T. according to the
VCR's clock or to "OFF" if D.S.T. doesn't apply to you.

When you’re finished with this set-up procedure, press
MENU to start the clock.

5∞ and TIME SCAN 5∞ can be used to perform all

operations. (In this case, press OK after each setting.)

MAKE CORRECTIONS

To change any of the settings, press OK or TIME SCAN
™

 £ until the item you want to change blinks,

then set as in step 6.

SELECT MODE

At the Override Auto Clock Set screen, place the arrow
next to "AUTO CLOCK SET" by pressing CH▲▼ or
TIME SCAN 

5∞, then power off the VCR. Do not

power it on again until the clock has been adjusted.
The clock is automatically adjusted on the hour except
at 11:00 PM, midnight, 1:00 AM and 2:00 AM. (The
clock will be adjusted on the hour based on the time
displayed on the VCR, not on the actual real time.)

This function enables automatic adjustment of the VCR’s
clock at the start and end of Daylight Saving Time.
With Auto DST activated, . . .
. . . on the first Sunday of April at 2:00 AM, the clock is

adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is

adjusted to 1:00 AM.

5,∞), THEN (OK)