Transition Networks S4TEF1029-122-NA Dépliant
Stand-Alone
Ordering Information
S4TEF1011-120
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
S4TEF1013-120
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
S4TEF1014-120
1310nm single mode (SC)
[20 km/12.4 mi.]
Link Budget: 16.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
S4TEF1015-120
1310nm single mode (SC)
[40 km/24.9 mi.]
Link Budget: 26.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1016-120
1310nm single mode (SC)
[60 km/37.3 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1017-120
1550nm single mode (SC)
[80 km/49.7 mi.]
Link Budget: 29.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1035-120
1550nm single mode (SC)
[120 km/74.6 mi.]
Link Budget: 36.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
**S4TEF1040-120
1 SFP port (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
**S4TEF1040-140
2 SFP ports (Empty)
to
(4) RJ-48
[1.5 km/0.9 mi.]
Single Fiber Products
Recommended use in pairs
*
S4TEF1029-120
1310nm TX/1550nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1029-121
1550nm TX/1310nm RX single fiber
single mode (SC)
[20 km/12.4 mi.] Link Budget: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1029-122
1310nm TX/1550nm RX single fiber
single mode (SC)
[40 km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
*
S4TEF1029-123
1550nm TX/1310nm RX single fiber
single mode (SC)
[40km/24.9 mi.] Link Budget: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
Specifications
Standards
Ethernet
interface:
IEEE
802.3™-2008
TDM
interfaces:
ANSI T1.102, T1.403 and T1.408
ITU I.431, G.703,G.736, G.775 and G.823
ETSI 300-166, 300-233 and TBR 12/13
AT&T
Pub
62411
Switches
Numerous switch settings for line coding, line buildout,
loopback (per port), AIS setting
Dimensions
Width: 3.7” [94 mm]
Depth: 4.7” [119 mm]
Height: 1.8” [46 mm]
Power
External AC/DC provided; 12 VDC, 1.25A; unregulated;
standard;
UL
Listed
Power Consumption
4.4 Watts
Operating Temperature
-40°C – 70°C (not including power supply)
Storage Temperature
-40°C – 85°C
Altitude
0 – 10,000 ft.
Operating Humidity
5% – 95% (non-condensing)
Shipping Weight
2 lbs. [0.90 kg]
Regulatory Compliance
EN55022 Class A, EN55024, CE mark
Warranty
Lifetime
4
Low cost transport capability: (4) T1/E1/J1
4
Target applications of the device include: FTTx, such as Fiber-to-the-Busi
ness, Fiber-to-the-Building, Fiber-to-the-MDU and Fiber-to-the-Home;
Cell Tower Backhaul
Cell Tower Backhaul
4
Automatic Link Restoration
4
Remote Management
The product provides physical layer status monitoring and alarm classification func-
tions for Telecom operators to manage their fiber optic network and reduce operation
and maintenance costs.
Copper connections are compatible with G.703 and AMI/B8ZS/HDB3; while the optical
connection will run at 155 Mbps. A hardware-based solution guarantees the constant
bit rate of TDM transport without requiring traffic management.
tions for Telecom operators to manage their fiber optic network and reduce operation
and maintenance costs.
Copper connections are compatible with G.703 and AMI/B8ZS/HDB3; while the optical
connection will run at 155 Mbps. A hardware-based solution guarantees the constant
bit rate of TDM transport without requiring traffic management.
Application
S4TEF10xx-120
S4TEF10xx-120
stand-alone network interface device
Features
4
Loopback
4
Local and Remote Loopback
4
AIS/TAOS
4
LEDs for each data port
4
Settings for line code, line length,
local loopback or remote loopback
4
T1/E1/J1 mode settings
4
Local (AUX) Management Interface
4
Access to complete status information
on local and remote device
4
Field Upgradeable Firmware
4
Extended Operating Temperature
see also:
4x T1 Transport Mux Point System™ Slide-In-Module NID
4x T1/E1/J1 Copper to Fiber Transport Mux
4x T1/E1/J1 to Fiber Transport Mux
Devices must be used in pairs. Typically
installation will include a chassis card
[C4TEF, pg 60] installed in the Point
System™ locally and a stand-alone de-
vice installed at the remote location.
installation will include a chassis card
[C4TEF, pg 60] installed in the Point
System™ locally and a stand-alone de-
vice installed at the remote location.
Optional Accessories (sold separately)
Wide Input (24 - 60 VDC) Power Supplies
SPS-2460-SA
Stand-Alone Power Supply
Mounting Options
WMBD
DIN Rail Bracket 5.0” [127 mm]
WMBD-F
DIN Rail Bracket (flat) 3.3” [84 mm]
WMBL
Wall Mount Bracket 4.0” [102 mm]
WMBV
Vertical Wall Mount Bracket 5.0” [127 mm]
*Note: Operating Temperature -20°C – 70°C
only on these models.
**
**
4x T1/E1/J1 to Fiber Transport Mux