Panasonic PT-RW430E Manuale Utente

Flexible 360-Degree Installation
The projectors can be
rotated vertically. This
means you can install
one at any up-and-down
angle you want, to
accommodate different
installation conditions.

Portrait Mode Capability
Portrait mode allows the projector to be mount-
ed with its side surface facing down,*

for pro-

jecting onto a long, vertical screen. This pro-
vides a fresh visual effect in museums, public
spaces, shopping centers, company showrooms,
and similar locations. The optional ET-PKR100P
ceiling mount bracket for portrait projection is
also available.

Multi-Screen Support System Seamlessly

Connects Multiple Screens

Edge Blending: The edges of adjacent
screens can be blended and their luminance
controlled.

Color Matching*

: This function corrects for

slight variations in the color reproduction
range of individual projectors.

Multi-Unit Brightness Control
This function automatically corrects the bright-
ness fluctuations that occur over time in the
individual projectors of a multi-screen system.
Up to eight projectors can be controlled by con-
necting to each other via a hub, and this can be
increased to a maximum of 2,048 projectors by
using “Multi Projector Monitoring & Control Soft-
ware.”*

3D Projection Capability
The PT-RZ470/
RW430 can deliver
impressive 3D
images when
viewed with active
3D glasses.*

HDMI input terminal supports 3D: The
HDMI input terminal supports 3D. Connect a
3D Blu-ray player to the projector to project
Blu-ray 3D images.

DLP™ Link

™

: You can build a 3D system

without the need for the optional transmitter.
#ONlGURATION

(DLP™ Link™

system)

External transmitter connection capability:
A 3D system can be configured by connect-
ing an additional 3D IR transmitter to the pro-
JECTORS

Image Appears Immediately—No Need for

Cooling after Use
Images do not appear quickly with lamp-based
projectors because the projector requires time to
warm up. With the PT-RZ470/RW430, the image
APPEARS

360°

Conventional Projector

Multi-Unit Brightness Control “ON”

Time

Brightness

(A)

(B)

Image from the

projector 1

Image from the

projector 2

Brightness

fluctuations occur.

Time

Brightness

(A´)

(B´)

Images from the

projector 1 and 2

Preset

brightness

At the time when the projectors are installed (A)

At the time when the projectors are installed (A´)

After a certain time has passed (B)

After a certain time has passed (B´)

Projector 1

Projector 2

Projector 1

Projector 2

With edge

blending

Without edge

blending

Overlapping
image edges

PT-RZ470
PT-RW430

Color

matching

Edge blending

Brightness

Visible

brightness

100%

Start-up time

Time

Power is

turned on

Power is

turned on

Light source goes on

Lamp goes on

Start-up time

Lamp-based Projector

Time is required to reach maximum brightness.

Maximum brightness is reached as soon as the
light source goes on.

PT-RZ470/RW430

Professional System Integration

*9 The projector itself cannot be set vertically by itself. Also, the side with terminals

should be facing downward. Using the projector at an angle that exceeds the

available angle of 210° may result in malfunctions. If setting up the projector at an

angle that exceeds 210° is required, consult your dealer.

*10 Consult you dealer for information about color matching software.

reduced in order to protect the projector unit. If this software is used for the

brightness control of multiple projectors, please ensure that as far as possible the

temperature of the surroundings is the same for all projectors.

*12 To view 3D images, active-shutter 3D glasses are separately required. (In the active

shutter system, the right/left liquid crystal shutter is opened and closed alternately

according to projected images.