Garmin GPSMAP 620 010-00762-00 Manuale Utente

Getting Started

•  If the device will not be used for an extended time (longer than 

one week), remove the battery pack.

  CautioN: The GPSMAP 620 is waterproof to the IPX7 standard 

only when the battery is connected and locked in place. Use 

extreme caution around water when removing the battery from the 

device.

To preserve the IPX7 water resistance of the GPSMAP 620, the SD 

card slot is located under the battery.

1.  Remove the battery pack. The SD card slot is in the bottom of 

the battery compartment, on the opposite side from the battery 

contacts.

2.  Place an SD card into the opening, label out, with the SD card 

contacts facing away from the battery contacts.

3.  Slide the SD card into the SD card slot, and press until it clicks 

softly and locks in place.

4.  Insert the battery pack.

1.  Remove the battery.
2.  Press in on the SD card until it clicks softly and releases from 

the SD card slot.

3.  Remove the SD card.