Garmin GPSMAP 620 010-00762-00 Manuale Utente

Getting Started

  CautioN: The ball-socket adapter on the GPSMAP 620 is not 

compatible with Garmin automotive mounts other than the included 

mount. Do not mount the device on a windshield.

  CautioN: Do not use the automotive mounting bracket in your 

boat. The power connector and speaker assembly are not water 

resistant, and therefore unsuitable for marine use. Additionally, do 

not use the automotive-mount base in your boat. The automotive-

mount base does not connect to the dashboard using mounting 

hardware, and therefore is not stable in marine conditions.

To install the marine mounting bracket in your boat, see the 

GPSMAP 620/640 Marine Mount Installation Instructions.

1.  Place the automotive-mount base on your dash, and press 

down on each of the four sides. The base bends and conforms 

to your dashboard.

2.  Snap the mounting bracket onto the automotive-mount arm.

3.  Plug the vehicle power cable into a power outlet in your vehicle.

  tip: If the bottom surface of the automotive-mount slides on the 

dash due to dust and dirt build-up, wipe it clean using a wet cloth.

1.  Flip up the locking tab on top of 

the mounting bracket.

2.  Fit the bottom of the device into 

the cradle.

3.  Tilt the device back until it 

stops.

4.  Flip down the locking tab to 

hold the device in the mounting 

bracket.

1.  Flip up the locking tab on top of the mounting bracket.
2.  Tilt the device forward, and lift it out of the mounting bracket.