Thecus All-Purpose Storage Server N1200BR Dépliant
Codici prodotto
N1200BR
69
Chapter 7: Troubleshooting Guide
N1200 Won't Turn On
In the event that the N1200 won’t turn on, check to see that the power cable is
correctly plugged in to the N1200. Also check to see if the electrical outlet is
correctly plugged in to the N1200. Also check to see if the electrical outlet is
functioning.
Resetting NAS IP Address and Admin Password
(Forgot My Password)
(Forgot My Password)
To reset the N1200, first make sure that the unit is powered off. With the unit
powered off, press and hold the reset button. With the reset button held down,
powered off, press and hold the reset button. With the reset button held down,
power on the system by pressing the power button. You will hear the unit beep
once when you turn it on, do not release the reset button until you hear the unit
once when you turn it on, do not release the reset button until you hear the unit
beep again. After that, the N1200's WAN IP address will be reset to
192.168.1.100 temporarily. Please note that all file services at this time will be
stopped.
192.168.1.100 temporarily. Please note that all file services at this time will be
stopped.
1. Point your browser to 192.168.1.100, you will see the following screen:
2. If you select Reset to Factory Default option, the system will be reset.
Below are the default system settings:
Admin password Æ admin
WAN IP address Æ 192.168.1.100
WAN IP Gateway Æ 192.168.1.1
WAN Jumbo Frame Support Æ Off
LAN IP Æ 192.168.2.254
LAN Jumbo Frame Support Æ Off
HTTP Port Æ 80
HTTPS port Æ 443
Admin password Æ admin
WAN IP address Æ 192.168.1.100
WAN IP Gateway Æ 192.168.1.1
WAN Jumbo Frame Support Æ Off
LAN IP Æ 192.168.2.254
LAN Jumbo Frame Support Æ Off
HTTP Port Æ 80
HTTPS port Æ 443
NOTE
Make sure that your PC is on the same IP segment as your N1200, i.e.
192.168.1.XXX when you are accessing the N1200 after a reset to factory default.