Deutsch DTM 06-6 S 16749 DTM 06-6 S Guida Informativa

A STEP AHEAD

139

Deutsch Tooling

How To Instructions

Step 3:
Measure the exposed 
strands to be sure the 
crimp length is correct. 

Step 1:
1. Choose the correct 
AWG for the contact be-
ing used.    

2. Measure from the end 
of the wire the recom-
mended strip length 
according to the contact 
size.

3. Place the wire into a 
stripping tool at the rec-
ommended strip length.  
Strip the wire according to 
stripping tool instructions.

Step 2:
1. After stripping, a small 
piece of the insulation 
should come off.

2. Check for any broken 
strands or for a dent in 
the wire. If either exist, 
the wire is damaged and 
should be cut and stripped 
again.



Leaving the stripped portion of 
the insulation on the wire until 
prior to crimping will avoid fl ayed 
wire strands.

helpful

helpful

hint

hint

Correct

Incorrect



The Industrial Micro Connect and Quick Connect Series use special contacts and tools. The contacts are smaller and designed 
for high pin density. Removal tools along with multiple crimp tools are available and are designed to work with the smaller 
contacts and tighter pin arrangements. The common contact system and tools are not compatible with the IMC or QC Series.

MH860

QC/IMC #22 crimp tool, adjustable AWG ranges, requires 86-5

86-5

QC/IMC crimp tool positioner for MH860

AF8-TH163

QC/IMC #20 and #16 crimp tool, adjustable AWG ranges

AMSC22/1

QC/IMC #22 crimp tool, low cost, only crimps 22 AWG wire

AMSC20/1

QC/IMC #20 crimp tool, low cost, only crimps 20 AWG wire

AMSC16/A/1

QC/IMC #16 crimp tool, low cost, only crimps 16 AWG wire

6757-201-2201

Insert/Removal Tool #22

6757-201-2001

Insert/Removal Tool #20

6757-201-1601

Insert/Removal Tool #16