Deutsch DTM 06-6 S 16749 DTM 06-6 S Guida Informativa

A STEP AHEAD

140

Deutsch Tooling

Step 3:
1. Insert wire into contact. 
Contact must be centered 
between indentors. Close 
handles until crimp cycle is 
completed.

2. Release handles and 
remove crimped contact.

Step 1:
1. Strip insulation from 
wire.  

2. Raise selector knob 
and rotate until arrow is 
aligned with wire size to be 
crimped. 

3. Loosen locknut, turn 
adjusting screw in until it 
stops.

Step 2:
Insert contact with barrel 
up. Turn adjusting screw 
counter clockwise until con-
tact is fl ush with indentor 
cover. Tighten locknut.



Tool must be 

adjusted for 

each type/size of 

contact.

Note

Note

Step 1:
Cycle the hand tool to the 
open position. Place the 
contact into the correct die 
nest.

Step 2:
Partially close the tool until 
the contact is held in place.

Step 3:
Insert the prestripped wire 
into the crimp area of the 
contact.

Step 4:
Close the tool until the 
ratchet releases. The ratchet 
is released when a loud 
click is heard and crimp is 
complete.

