Lecroy WAVEACE 1012 2-channel oscilloscope, Digital Storage oscilloscope, WaveAce 1012 Manuale Utente
Codici prodotto
WaveAce 1012
Operator's Manual
96
WA1K2K-OM-E RevB
Save - Press the Save option button to store your mask.
After pressing, the mask is saved Internally, or the SAVE
ALL screen is shown, depending on your Location control
setting (choose Internal or External as desired on Mask -
Page 1/2).
After pressing, the mask is saved Internally, or the SAVE
ALL screen is shown, depending on your Location control
setting (choose Internal or External as desired on Mask -
Page 1/2).
Load - Press the Load option button to retrieve a stored
mask. After pressing, the mask is retrieved Internally, or the
SAVE ALL screen is shown, depending on your Location
control setting (choose Internal or External as desired on
Mask - Page 1/2).
mask. After pressing, the mask is retrieved Internally, or the
SAVE ALL screen is shown, depending on your Location
control setting (choose Internal or External as desired on
Mask - Page 1/2).
Return - Press the Return option and the Pass/Fail menu is
shown.
shown.
4. Press the Return option button or the Utility front panel button
and the Utility menu is shown.
Using Record
The Record function can record the input waveform from CH1 and CH2
(also, CH3 and CH4 on four channel versions), with a maximum record
length of 2500 frames. This keeps you from having to watch the signal
when capturing abnormal signals over a long period of time.
(also, CH3 and CH4 on four channel versions), with a maximum record
length of 2500 frames. This keeps you from having to watch the signal
when capturing abnormal signals over a long period of time.
Access the Record function by pressing the corresponding option button
on the Utility menu. The Record menus are then shown.
on the Utility menu. The Record menus are then shown.