Nikon S2800 VNA571E1 Manuale Utente
Codici prodotto
VNA571E1
F
8
Techn
ical
N
N
o
tes
and Index
The camera turns off without
warning.
warning.
• The camera automatically turns off to save
power (auto off function).
• The camera and battery may not work properly
at low temperatures.
• The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
cooled, and then try turning it on again.
• The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
disconnected. Reconnect the USB cable.
–
Monitor is blank.
• The camera is off.
• The battery is exhausted.
• The camera has entered standby mode to save
• The battery is exhausted.
• The camera has entered standby mode to save
power. Press the power switch, shutter-release
button, A button,
button, A button,
c button, or b (e movie-
record) button.
• The flash lamp flashes while the flash is
charging. Wait for the flash to charge.
• The camera and computer are connected via
the USB cable.
• The camera and TV are connected via an audio
video cable.
Monitor is hard to read.
• Adjust the monitor brightness.
• The monitor is dirty. Clean the monitor.
• The monitor is dirty. Clean the monitor.
Date and time of recording
are not correct.
are not correct.
• If the camera clock has not been set, the “Date
not set” indicator flashes during shooting and
movie recording. Images and movies recorded
before the clock is set are dated “00/00/0000
00:00” and “01/01/2014 00:00” respectively. Set
the correct time and date for Time zone and
date in the setup menu.
movie recording. Images and movies recorded
before the clock is set are dated “00/00/0000
00:00” and “01/01/2014 00:00” respectively. Set
the correct time and date for Time zone and
date in the setup menu.
• The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepieces, and reset as required.
of the camera clock with that of a more accurate
timepieces, and reset as required.
Problem
Cause/Solution
A