AEG AR 4027 400452 Manuale Utente

13 

  Radio mode:

a)  Press the button shortly to play the saved stations 

sequentially for approx. 5 seconds. Press the desired 
station to quit the operation and to play the radio 
station.

b)  Hold down this button to start the automatic station 

scanning. SEARCH appears on the display. The 
search process can take some minutes. The stations 
are saved in the order of ascending frequencies. 
Then, the saved stations are played for a short time. 
Press a station button to quit the operation.

USB/CARD mode:
Direct selection of a music file. 
Press the AS/PS button, “NUM - - -” will be displayed on
the display. Turn the volume control to the desired file, 
or enter the number with the station buttons (button 1-6, 
MODE = 7,  /DIR   = 8,  /DIR   = 9, BAND = 0). Then,
press the SEL button (3) to play the file.

General
Supply voltage ................................... DC 12 V (negative ground)
Power consumption...........................................................5 A Max.
Power .....................................................................4 x 80 W (PMPO)
Playable file formats ......................................................MP3, WMA
Housing dimensions (Installation) ............182 W x 52 H x 108 D

FM band
Frequency range .......................................87.5 MHz ~ 108.0 MHz
Effective sensitivity .....................................................................4 µV
I.F. frequency ......................................................................10.7 MHz
Subject to technical changes without prior notice!
This device has been tested according to all relevant current 
CE guidelines, such as electromagnetic compatibility and low 
voltage directives, and has been constructed in accordance 
with the latest safety regulations.

11 

/DIR   Button

a)  In radio mode to choose a radio station.
b)  In USB/CARD mode:

•  Press the button to choose the next music title.
•  Hold down the button to choose the next direc-

tory (if directories are existing on the storage 
media).

12 

BAND/PTY Button
a)  Radio Operation 

Shortly press the BAND/PTY button to switch be-
tween the three FM- (UKW) areas. The designation of 
the corresponding level appears in the LCD display.

b) 

PTY button 
Radio operation:  
PTY Selecting the program type 
Besides the station name, some stations broadcast 
information about the program type of your program. 
This information can be displayed on your car radio.

  The program can be of the following types, for 

example:

 Using the PTY function, you can select specific

stations of a certain program type. The individual 
program types are divided into two categories: Music 
and Speech. You can find a list of program types on
page 43.
•  Hold down the BAND/PTY button 1x to switch on

the function and to select the category “Speech”.

•  Hold down the BAND/PTY button 2 xs to select

category “Music”. 

If you hold down the BAND/PTY button for a third
time, the function will be switched off.

 Then, press station buttons 1-6 to make the PTY

choice. The selected program type appears in the 
display.

 If PTY is selected, the radio starts to search for respec-

tive PTY information and stops when the desired PTY
information is found. 
If the desired program type is not found, the mes-
sage “NO PTY” appears on the display.

 If the PTY information does not exist anymore, the

PTY function will automatically switch to normal
mode.