Renkforce Funk-Wetterstation mit Wetterforecast Wireless Weather Station AOL-5052B Scheda Tecnica

•  Briefly push the button „MODE“ (A). The minutes of the time flash. Set it with the buttons

„+“ and „-“. Each push of a button will also automatically reset the seconds to „00“.

•  Briefly push the button „MODE“ (A) to leave setting mode.

 Independently of the settings made, the radio tower symbol (5) will disappear. This

also applies if you have only changed the time zone, but not time or date.

Then proceed as described in the chapter „Starting DCF Reception Attempt

Manually“. The settings for time zone, the language for display of the weekday

and 12h/24h mode remain active.

The weather station has two different alarm functions. Alarm function 1 is only tripped

from Monday through Friday when it is on. Alarm function 2 is only tripped from Saturday

and Sunday when it is on.

Displaying the Alarm Time
Briefly  press  the  button  „MODE“  (A)  repeatedly  to  switch  between  the  following

displays:
•  Alarm time 1 (display „A1“ to the right of the alarm time)
•  Alarm time 2 (display „A2“ to the right of the alarm time)
•  Time

Setting Alarm Time
•  Push the button „MODE“ (A) sevaral times until either the alarm time 1 (display „A1“

to the right of the alarm time) or the alarm time 2 (display „A2“ to the right of the alarm

time) is displayed.

•  Hold down the button „MODE“ (A) for about three seconds until the alarm time hours

flash in the display.

•  Set the alarm time hours with the buttons „+“ and „-“. Keep the respective button

pressed for quick adjustment.

•  Briefly push the button „MODE“ (A). The minutes of the alarm time flash. Set it with

the buttons „+“ and „-“. Keep the respective button pressed for quick adjustment.

•  Briefly push the button „MODE“ (A) to leave setting mode.