Renkforce Funk-Wetterstation mit Gewitterwarnung Wireless Weather Station W2052GU Scheda Tecnica

The weather station and external sensor can be powered with  batteries. 

However, the operating time and display contrast will decrease due to the 

decreased voltage (battery = 1.5 V, rechargeable battery = 1.2 V). Since 

batteries are very sensitive to cold, the operational duration of the external 

sensor is greatly reduced in winter. 
Therefore we recommend you power the weather station as well as the 

external sensor with high grade alkaline batteries to guarantee long and safe 

functioning. 
The weather station can also be powered via the power supply in the delivery scope. 

Information about this is available in the next chapter.

Please note:
First insert the batteries into the external sensor, then into the weather station. 
If you proceed in another sequence the weather station may not recognize 

the external sensor.  In this case a manual search for the external sensor can 

be carried out later. 
If you want to test the weather station and external sensor on initial start up 

e.g. in a room, do not place the external sensor directly next to the weather station.  

Otherwise radio interference of the too stronger signal can lead to reception problems. 

Keep a distance of at least 1 m between the weather station and the external sensor.
This functions test ensures that later reception problems (after installation) are due to 

the arrangement of the weather station and external sensor.
The range between the external sensor and the weather station amounts to 100 m.

Please also note chapter 14.

 

• Open the battery compartment (20) underneath the external sensor while unscrewing 

the screws with a small Phillips-tip screw driver and insert 4 AA batteries into the 

battery compartment to the correct polarity (please note plus/+ and minus/-). Close 

the battery compartment and tighten the screws.