Renkforce Funk-Wetterstation mit Gewitterwarnung Wireless Weather Station W2052GU Scheda Tecnica

 • The antenna symbol   means the reception has not succeeded (however, the daily 

synchronization is still activated). The BARO button (2)  must be held down until the 

antenna symbol appears in the display to start the search of the DCF signal.

 • If the reception fails further on you can attempt it later at other locations.  Place 

the weather station further away from sources of interference such as mobiles, 

household devices, TVs etc. 

 • Keep the BARO button (2)  pressed down until the antenna symbol disappears, to 

deactivate the radio controlled reception and stop the daily synchronization. 

 • Press the Clock/Set button (13) to choose between time and calendar.
 • Follow the steps below to set the 12/24 hour format, the hours format, day/month 

format, time zone offset, the time and calendar.

 • Keep the Clock/Set button (13) pressed to reach the time setting mode.
 • Use the + or - buttons to correct the selection and the Clock/Set button to confirm (or

skip) the setting in the sequence below:

 • Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr >

Min > Yr > > Month> Date > Temperature unit > Rainfall unit > Wind Speed unit > 

Pressure unit > Pressure value > EXIT 

 • (Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr

> Min > Yr > > Month> Date > Temperature unit > Rainfall unit > Wind Speed unit > 

Pressure unit > Pressure value > EXIT).

You must set the clock and calendar manually if the weather station cannot 

receive any DCF signal.
If the device can receive a DCF signal however, you want to change the time 

zone, you can select TIME ZONE OFFSET between +12 and -12 hours (this is 

the time difference between the radio controlled time and your local time).

The "ZONE" symbol appears in the clock and calendar display mode if you set 

the TIME ZONE OFFSET to something other than 0.

 • Press the ALARM button (14) to display the alarm time, whereupon the "ALARM" 

symbol appears in the display.