Renkforce Funk-Wetterstation mit Gewitterwarnung Wireless Weather Station W2052GU Scheda Tecnica

 • Keep the clock/set button (13) pressed to reach the setting mode. 
 • Press the + or - button (11 or 12)  to correct the selection  and the Clock/Set button to 

confirm the setting in the sequence below (or to skip):

 • Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr >

Min > Yr > > Month> Date > Temperature  unit (degree C or degree F) > Rainfall unit > 

Wind Speed unit > Pressure unit > Pressure value > EXIT

 • (Weather Forecast > 12/24hr format > D/M or M/D format > Time Zone Offset > Hr >

Min > Yr > > Month> Date > Temperature  unit (degree C or degree F) > Rainfall unit > 

Wind Speed unit > Pressure unit > Pressure value > EXIT)

 • PLEASE NOTE: The sensor of the outside temperature and humidity is installed in 

the external sensor and set as channel 1. Additional or several thermo hygrometer 

external sensors can be acquired separately and should be either set up as channel 

2 or channel 3. 

 • Press the Memory/-/Clear button  (11) button again to display the maximum and 

minimum values of temperature, humidity, heat index, dew point, wind speed and 

wind chill.

 • The corresponding "MAX" and "MIN" symbols appear. Keep the 

Memory/-/Clear button  (11) in max/min mode pressed, to reset the saving of the 

recordings. 

 • The symbol for the frost alarm 

  appears on the display next to the display for 

wind chill, if the outside temperature falls to or under 4 C

0 

 with channel 1. Early 

warning about possible icy road conditions is issued with this.

 • The heat index connects the effects of heat and humidity. It specifies the discernible

temperature, how hot the heat-humidity-connection feels.

 • Again press the Temp (3) button to display the inside and outside heat index on the 

screen.  The "HEAT INDEX" symbol appears.