Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente
Codici prodotto
11-02-01-03-10.014
Connection
INSYS GPRS 5.0 serial
26
Mai 06
Mark and then apply the selection.
Alternatively, the INSYS GPRS 5.0 serial can be registered using
a terminal program.
Enter PIN
a terminal program.
Enter PIN
If manual network provider selection is required, the
network provider identification number must be deter-
mined. You will find a chart for the INSYS GPRS 5.0 serial
with identification numbers and names in the AT com-
mand overview – available at no charge from INSYS.
In our example, the German network T-Mobile with the
identification number 26201 is used.
mined. You will find a chart for the INSYS GPRS 5.0 serial
with identification numbers and names in the AT com-
mand overview – available at no charge from INSYS.
In our example, the German network T-Mobile with the
identification number 26201 is used.
Network provider selection for T-Mobile in Germany
Perform a RESET to use the PIN.
Manual registration after each reset
If the INSYS GPRS 5.0 serial is started and registered from an ex-
ternal application, this application may request a manual login.
In this case, the following method should be used:
Enter the PIN (when the PIN is entered via this command, it
must be re-entered for each reset).
Prompt manual registering (this command may trigger a wait-
ing period of several seconds)
ternal application, this application may request a manual login.
In this case, the following method should be used:
Enter the PIN (when the PIN is entered via this command, it
must be re-entered for each reset).
Prompt manual registering (this command may trigger a wait-
ing period of several seconds)
5.2
TCP transparent (GPRS modem emulation)
In this mode, user data is transmitted transparently via the serial
interface and in TCP/IP packets via the GSM/GPRS network. The IN-
interface and in TCP/IP packets via the GSM/GPRS network. The IN-
AT**PIN
AT**PROVIDER=
1,2,26201
1,2,26201
AT**RESET
AT+CPIN=<PIN>
AT+COPS=0