Insys GPRS 5.0 serial 11-02-01-03-10.014 Manuale Utente

Connection 

 

INSYS GPRS 5.0 serial 

 

36

 

 

Mai 06

 

Connections can be terminated as follows: 
Manual termination using the ATH command in online command 
mode 
By DTR drop (for the setting AT&D2) 
If the remote terminal hangs up 
After switching from data mode to online mode, the connection 
will remain established. However, data is no longer transmitted to 
the remote terminal. The online command mode is also entered 
through DTR drop (setting AT&D1) or by activating the reset input 
twice within 10 seconds. 
Hang up (terminate connection to the other party) 
The connection was terminated. 

 

Alternatively, the settings can be entered or modified using the 
terminal program. 
To call an analogue modem, an analogue protocol must be set. 
E.g.: The protocol V.32 with a data rate of 9600 baud. 

 

Alternatively, the settings can be entered or modified using the 
terminal program. 
To call an ISDN TA it is necessary to set the ISDN protocol V.110. 
While doing so it must be observed that the remote terminal has to 
work with the same protocol as well. 
E.g.: The protocol V.110 with a data rate of 9600 baud.