Insys ISDN Terminal Adapter 4.0 11-02-01-02-00.015 Manuale Utente
Codici prodotto
11-02-01-02-00.015
14
Operating Manual INSYS ISDN TA 4.0
Version 2.02 – 01.04
Commands may be combined to one command line. Spaces between the individual main
parts are ignored.
The commands are acknowledged with OK or ERROR.
parts are ignored.
The commands are acknowledged with OK or ERROR.
5.1.1.2 Result Codes For Normal Data Communication
Response Code
Type
Description
OK
0
final
command executed, no error
CONNECT 1
intermediate
report
report
connection established, when parameter setting X=0
CONNECT
[<text>]
[<text>]
intermediate
report
connection established, when parameter setting X>0
<text>: e.g. ‘cnx 6400’. The data transmission rate is 64.00
Bit/s then.
<text>: e.g. ‘cnx 6400’. The data transmission rate is 64.00
Bit/s then.
RING
2
unsolicited
ring signal detected
NO CARRIER
3
final
connection not established or terminated
ERROR
4
final
invalid command or command line too long
NO DIAL
TONE
TONE
5
final
no dial tone, connection set-up not successful, wrong opera-
tion mode
tion mode
BUSY
6
final
remote terminal busy
NO ANSWER
7
final
connection set-up time-out
5.1.2 Configuration With The TA Configurator
The TA configurator can be started by entering a special command via the command in-
terface (PAD: ”CONF” or AT: ”ATCONF”).
terface (PAD: ”CONF” or AT: ”ATCONF”).