Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
INSYS GSM 4.2 LOGO!
Commisioning
Dezember 06
27
7. Enter the PIN number (stored in the INSYS GSM 4.2 LOGO!): Select the Basic
Settings
tab, select New PIN, and enter the PIN for the SIM card. The PIN will be
stored in the INSYS GSM and used at each restart to log in to the GSM network.
Transmit the setting by activating the Send settings button.
Transmit the setting by activating the Send settings button.
8. Disconnect the voltage supply.
9. Press the recessed yellow knob above the SIM card holder
(see picture) and remove the card holder. Insert the SIM
card and reinsert the card holder. The contacts of the SIM
card point to the left during insertion.
card and reinsert the card holder. The contacts of the SIM
card point to the left during insertion.
10. Connect the power supply.
11. The initialization operation starts over (see item 4): If
11. The initialization operation starts over (see item 4): If
the device has successfully logged in, the Power and Signal
LEDs then illuminate, and the Signal LED indicates the
strength of the GSM signal.
LEDs then illuminate, and the Signal LED indicates the
strength of the GSM signal.