Insys GSM LOGO 4.2 Compact 11-02-01-03-04.001 Manuale Utente
Codici prodotto
11-02-01-03-04.001
HSComm
INSYS GSM 4.2 LOGO!
32
Dezember
06
5.3.2 Interface
Settings for the serial interface used on the configuration PC. The baud rate and
format (data bits, stop bit, parity) must match the settings of the serial interface
on the side of the INSYS GSM 4.2 LOGO!
format (data bits, stop bit, parity) must match the settings of the serial interface
on the side of the INSYS GSM 4.2 LOGO!
5.3.3 Errors
If errors occur during parameter assignment, a menu is displayed indicating the
error messages in plain text.
error messages in plain text.
5.3.4 Language
Selection of the HSComm interface
language: German or English. The
setting does not have any effect on the
functionality of the INSYS GSM 4.2
LOGO!
language: German or English. The
setting does not have any effect on the
functionality of the INSYS GSM 4.2
LOGO!
5.3.5 PLC
Recommended default settings and notes on use of the INSYS GSM 4.2 with a PLC
from leading manufacturers. These settings can be adapted to the particular
requirements.
These settings are only transferred by activating the Configure PLC modem button.
from leading manufacturers. These settings can be adapted to the particular
requirements.
These settings are only transferred by activating the Configure PLC modem button.
5.3.6 Overview
All of the current settings of HSComm LOGO! are displayed for easy review. The
output extends over several screens and can be printed out or saved as a text file.
output extends over several screens and can be printed out or saved as a text file.
Note:
Read out your device settings and have them ready whenever you
initiate a connection to the hotline!
initiate a connection to the hotline!