Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuale Utente
Codici prodotto
11-02-01-03-04.002
INSYS GSM 4.2
INSYS GSM 4.2 compact
INSYS GSM 4.2 compact
Functions and their Configuration
Sep-06
47
Idle detection
The INSYS GSM can terminate hanging connections, over which no data is exchanged
anymore, automatically after a specified waiting period. Each character, which is sent via
the serial interface (both directions), restarts the timer.
You may enter a waiting time of up to 255 seconds. To deactivate idle detection enter a
waiting time of 0 seconds.
The INSYS GSM can terminate hanging connections, over which no data is exchanged
anymore, automatically after a specified waiting period. Each character, which is sent via
the serial interface (both directions), restarts the timer.
You may enter a waiting time of up to 255 seconds. To deactivate idle detection enter a
waiting time of 0 seconds.
Detect field strength intensity
Use the button "Detect GSM field strength now" to read out the field strength. (see Chap.
3.9 )
Use the button "Detect GSM field strength now" to read out the field strength. (see Chap.
3.9 )
Query login state
The validity of the PIN and the login state are displayed under the control box "PIN ac-
tive" in plain text. (see Chap. Fehler! Verweisquelle konnte nicht gefunden werden. )
The validity of the PIN and the login state are displayed under the control box "PIN ac-
tive" in plain text. (see Chap. Fehler! Verweisquelle konnte nicht gefunden werden. )
Procedure: Configure PIN, service center number and idle detection
1.
1.
Start the program HSComm under Windows.
The configuration software is started and displays the tab "Basic settings".
The configuration software is started and displays the tab "Basic settings".
2.
In the group "GSM connection", activate the control box "New PIN" and enter the
new PIN in the entry field.
new PIN in the entry field.
Note
The PIN is encrypted. The displayed character is *.
The PIN is encrypted. The displayed character is *.
3.
To delete the PIN, activate the control box "Delete PIN" in the group "GSM connec-
tion".
tion".
4.
Enter the service center number (SCN) of the GSM provider in the group "GSM
connection" in the field "Service center number". Use the international format (e.g.
Germany: +49...) for entering the number (see Chap. 8).
connection" in the field "Service center number". Use the international format (e.g.
Germany: +49...) for entering the number (see Chap. 8).
5.
Enter the requested waiting time (in seconds) in the group "GSM connection" in
the entry field "Idle detection".
the entry field "Idle detection".
Pertinent AT commands
AT**PIN
SIM card PIN
AT**PROVIDER
Preferred provider
AT**SCN
Service Center Number
AT**DTC
Idle connection control (Data Transmit Controller)
AT+CREG
Query login state
6.1.2 DTMF tone processing
DTMF tones (e.g. from a touch-tone phone) can be used via a voice connection to query
alarm inputs and to switch outputs. Requirements:
alarm inputs and to switch outputs. Requirements:
¾
The number for voice connections has been dialed.
¾
The automatic processing of DTMF tones is enabled.
Incoming voice calls are automatically accepted for enabled DTMF processing.