Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuale Utente
Codici prodotto
11-02-01-03-04.002
INSYS GSM 4.2
INSYS GSM 4.2 compact
INSYS GSM 4.2 compact
Functions and their Configuration
Sep-06
53
6.1.8 Protocol
For a data connection with a device outside the GSM network (analog modem or ISDN
TA), the right protocol has to be selected. This setting is not important for data connec-
tions to a GSM device.
Enter the requested protocol in the group "Protocol (not GSM)".
TA), the right protocol has to be selected. This setting is not important for data connec-
tions to a GSM device.
Enter the requested protocol in the group "Protocol (not GSM)".
6.1.9 Handshake
Handshake controls the data flow at the serial interface if the data rate is higher than
what the INSYS GSM or the connected terminal device can currently process.
what the INSYS GSM or the connected terminal device can currently process.
Note
You must deactivate handshake of the serial interface in the follow-
ing cases:
You must deactivate handshake of the serial interface in the follow-
ing cases:
¾
The INSYS GSM is operated as a stand-alone device, i.e. it is
not connected via the serial interface.
¾
The INSYS GSM is operated at a device which does not sup-
port hardware handshake.
No handshake
The INSYS GSM ignores redundant data.
Software handshake
The INSYS GSM controls the data flow with the help of control characters (XON/XOFF) via
the data lines.
The INSYS GSM ignores redundant data.
Software handshake
The INSYS GSM controls the data flow with the help of control characters (XON/XOFF) via
the data lines.
Hardware handshake
The INSYS GSM controls the data flow via the separate control lines RTS/CTS.
The INSYS GSM controls the data flow via the separate control lines RTS/CTS.
Procedure: Configure handshake:
Select the requested behavior in the group "Handshake".
Select the requested behavior in the group "Handshake".
Pertinent AT commands
AT\Q
Data flow control of the serial interface
6.1.10 DTR behavior
The control line DTR of the serial interface indicates whether a device (configuration PC,
control) is connected with the INSYS GSM and is active. The setting controls the behavior
when the DTR signal is missing, e.g. when the terminal device (PC, control) is discon-
nected.
control) is connected with the INSYS GSM and is active. The setting controls the behavior
when the DTR signal is missing, e.g. when the terminal device (PC, control) is discon-
nected.
Note
You must deactivate the DTR behavior of the serial interface in the
following cases:
You must deactivate the DTR behavior of the serial interface in the
following cases: