Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuale Utente

INSYS GSM 4.2  
INSYS GSM 4.2 compact 

 

Functions and their Configuration 

 

Sep-06 

            55 

The INSYS GSM can send and receive SMS. During the processing of the SMS, the LED 
Status is flashing. 
Incoming SMS messages are optionally protected with the remote configuration pass-
word. 
The INSYS GSM can send the following SMS types: 

¾

  Alarm message 

¾

  Power up SMS 

¾

  Periodic alive message by SMS 

 

¾

  Valid number of the SMS service center SCN (see Chap.  Table: GSM - Service Cen-

¾

  ) 

¾

  The INSYS GSM is logged in at the GSM network.  

(see Chap.  If required, enter the Pin (see Chap. 3.5.1) or the PUK (see Chap. 0). 

 
Incoming SMS messages may be optionally protected with a password. 

Pertinent AT commands 

Automatic SMS reception processing 

 

SMS are stored at the SMS storage locations in the SIM card. You can read out the num-
ber of all available SMS storage locations on the SIM card using the tab "Basic settings" in 
the HSComm software in the group "GSM connection" and the button "Locate SIM SMS 
storage locations now". 
The INSYS GSM queries the SMS storage locations as soon as the INSYS GSM is not busy 
with data connections, alarm processing or processing of AT commands for 60 seconds.  
Any activity at the serial interface (AT commands) restarts the query interval without 
executing the query. No query is made during an active data connection. 
Commands entered at the serial interface are ignored. 
The baud rate and the number of SMS storage locations to be configured determine the 
duration of the query. 
Example: 

Baud rate 

19200 bps 

Configured SMS storage loca-
tions: 

15 

Result:  

Query duration: 

5 seconds