Insys GSM 4.2 Compact 11-02-01-03-04.002 Manuale Utente
Codici prodotto
11-02-01-03-04.002
Functions and their Configuration
INSYS GSM 4.2
INSYS GSM 4.2 compact
76
Sep-06
Procedure: Configure the passwords and the DTMF PIN
1.
Start the HSComm and switch to the tab "Access control".
2.
To configure a password, click on the button "Set password" in the group "Pass-
word for" at the desired password.
A dialog box to enter the password is opened.
word for" at the desired password.
A dialog box to enter the password is opened.
3.
Enter the password.
The password is sent to the INSYS GSM.
The password is sent to the INSYS GSM.
4.
Activate the control box "Password active" next to the requested password.
Pertinent AT commands
AT**PASS
Password
6.5.3 Security callback
The security callback process:
1.
1.
If a security callback number was entered, the INSYS GSM will query the password
for all connections and terminate the connection.
for all connections and terminate the connection.
2.
If the password was correct, the INSYS GSM will establish a new connection to the
security callback number after 30 seconds.
security callback number after 30 seconds.
3.
When this connection is established, the message CALLBACK IN PROGRESS is sent
after 2 seconds. After further 2 seconds the interface is free for data transmission.
after 2 seconds. After further 2 seconds the interface is free for data transmission.
4.
If the remote terminal is busy, the INSYS GSM will redial according to the setting
"Dialing attempts". (see Chap. 4.1)
"Dialing attempts". (see Chap. 4.1)
The LED Status is flashing during the security callback process.
The security callback number is independent from the caller number, which triggers the
security callback.
The security callback number is independent from the caller number, which triggers the
security callback.