Timex Watch (T2P277) T2P277 Scheda Tecnica

When worn on wrist, thermometer reading is affected by 

body heat. For more accurate readings, remove watch 

and put in shade for at least several minutes. 
Watch can measure water temperature also, if sub-

merged. Be sure to select temperature display before 

placing watch in water, as buttons should not be pressed 

when watch is underwater.
Thermometer readings are taken every minute, more 

frequently, if temperature is changing. 
TIDE CLoCK

For tide clock, indicator hand always rotates clockwise, so 

tide is rising when hand is pointing left and falling when 

pointing right. Number of hours to next high/low tide is 

shown on tide scale.

Tides are influenced by sun position and shape of shore-

line, so tide clock cannot precisely give times of high and 

low tides. Periodic adjustment may be necessary. 
To set tide clock, pull crown to MIDDLE position. Press either 

TIDE or TEMP push button to move hand to current tide. 

TIDE and TEMP push buttons move hand clockwise and 

counterclockwise, respectively. Push crown in when done. 
CoMPASS CALIBrATIon

Before use, the compass must be calibrated.
Since a compass uses the earth’s magnetic field, you 

must be aware of large metallic objects, such as vehicles 

or bridges, or objects that give off electromagnetic 

radiation, such as televisions or computers, which 

could affect the magnetic field around the watch. If the 

compass is calibrated near such objects, it will only