Timex Watch (T2P277) T2P277 Scheda Tecnica

4.  When done, press C (Compass), keeping the watch 

level. The 4th center hand moves back and forth to 

acknowledge the end of calibration and then moves to 

the current magnetic declination setting.

5.  If you do not wish to set the magnetic declination, 

push the crown in. Otherwise, to have watch 

automatically compensate for the declination angle, 

turn the compass ring until north is at 12 o’clock.

6.  Press A or B to move the 4th center hand west (-) 

or east (+), respectively, to point to your location’s 

declination angle using the declination scale. Hold a 

button to move the hand quickly. See the figure on 

next page for an example. 

7.  Push the crown in when done. 

A

B

Normally, the compass is inactive, with the 4th center 

hand pointing to 12 o’clock or showing the chronograph 

seconds.
While holding the watch level, press C (COMPASS) to 

activate the compass. The compass hand moves to 

point north. If the watch is turned, the 4th center hand 

will continue to move, always pointing north. After 20