Ideal Electrical TightSight Digital-Multimeter, DMM, 61-765 Scheda Tecnica

 9

• Ensure test leads are disconnected from

  circuit or components.

• Remove test leads from input jacks

  on meter.

• Remove the two screws from the

  battery cap.

• Remove the battery cap.

• Replace battery with a new 9V battery.

• Assemble the battery cap to the

 meter and re-tighten the screws.

Clean the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
Service and Replacement Parts:

This unit has no user-serviceable parts.
For replacement parts or to inquire about service information contact IDEAL INDUSTRIES,

INC. at 1-877-201-9005 or visit our website www.testersandmeters.com.

Replacement boot is

available.

10

Displays:

4 digit LCD with 9999 counts for both displays with 41 segment

 

analog bar graph on front display

Backlight:

Green illumination with auto-off after 3 minutes

Polarity:

Automatic, positive implied, negative (-) polarity indication.

Overrange:

“OL” indication is displayed.

Zero:

Automatic

Display (Measure) Rate: Display updates 2 times per second, nominal.
Auto Power Off:

After 30 minutes of non-use.

Battery Life:

100 hours continuous with Alkaline (61-763, 61-765)

Low Battery Indication:  The “ “ appears in the display with insufficient voltage for about

one hour. Then “bAtt” displays for 5 seconds and unit powers down.

Indicator duration varies by battery brand.

Power Supply:

(1) 9V battery (NEDA 1604, JIS 006P, IEC 6F22)

With an isolated battery compartment.

Accuracy:

Stated accuracy at 23°C ±5°C, <75% R.H.

Temperature

0.1 x (specified accuracy) per °C,

Coefficient:

(0°C to 18°C, 28°C to 50°C).

Altitude:

6561.7 ft. (2000m)

Operating Environment: 32°F to 122°F (0°C to 50°C) at < 70% R.H.
Display Environment:  -4°F to 158°F (-20°C to +70°C)
Storage Environment:  -4°F to 140°F (-20°C to 60°C) at < 80% R.H. without battery
Jaw Opening:

Accepts a 1.42” (36mm) conductor

Dimensions:

8.7”H x 3.1”W x 1.8”D (222mmH x 80mmW x 45.5mmD)

Weight:

12.3 oz. (350g) including battery

Accessories included:  Carrying Case, Test Leads with alligator clip, (1) 9V

 

battery, operating instructions.

Safety:

Safety: Complies with (UL61010-1) (Second Edition),

IEC 61010-2-032, IEC 61010-031. EN61010-1, EN61010-2-032,

EN61010-031 specifications, CAN/CSA C22.2 no. 1010.1-92 and

CAN/CSA C22.2 No. 1010.2.032-96 Cat IV-600V/Cat III-1000V.

 

Double Insulation

Instrument has been evaluated and complies with insulation category IV (overvoltage

category IV). Pollution degree 2 in accordance with IEC-644. Indoor use.

N12966