Insys Modem 56k 4.1 m/UL 11-02-01-01-40.022 Manuale Utente
Codici prodotto
11-02-01-01-40.022
INSYS Modem 56k UL
Configiration
Juni 05
7
4
Configuration
4.1 Configuration Software HSComm
INSYS Modem is configured by AT commands from a terminal program or PLC. All basic
functions of INSYS Modem can be controlled by the configuration software HSComm
without any knowledge about single commands and parameters. The description of set-
tings within HSComm is followed by a list of corresponding AT commands. A terminal
window within HSComm allows direct command input when required.
A complete description of all AT commands and registers is available in a separate
document.
HSComm is running under Microsoft Windows from version 95.
functions of INSYS Modem can be controlled by the configuration software HSComm
without any knowledge about single commands and parameters. The description of set-
tings within HSComm is followed by a list of corresponding AT commands. A terminal
window within HSComm allows direct command input when required.
A complete description of all AT commands and registers is available in a separate
document.
HSComm is running under Microsoft Windows from version 95.
4.1.1 HSComm Operation
HSComm tests the type of the connected device at startup or by menu Device
Æ
Test de-
vice
and displays name and firmware revision in the upper right corner of the program
window. By default settings are available only when the corresponding firmware revision
has been recognized by the test.
The buttons in the right column of the window allow to read out the current settings, to
reset the modem or to set it back to factory settings.
All parameter settings are transmitted to the modem after pushing the SEND button.
Configurations can be saved and restored by the commands of the File menu.
Error messages of the modem are displayed in the Error menu.
For operation in connection with PLCs refer to chapter 7.
The key F1 provides a help window for the currently selected option at any time.
has been recognized by the test.
The buttons in the right column of the window allow to read out the current settings, to
reset the modem or to set it back to factory settings.
All parameter settings are transmitted to the modem after pushing the SEND button.
Configurations can be saved and restored by the commands of the File menu.
Error messages of the modem are displayed in the Error menu.
For operation in connection with PLCs refer to chapter 7.
The key F1 provides a help window for the currently selected option at any time.