Gw Instek PCS-1000 Digital-Multimeter, DMM, PCS-1000 Scheda Tecnica

Set Up 

Power Up 

 

Steps 

1.  Connect the power cord to the rear panel 

socket.  

 

 

2.  Press the power switch.  

The unit will perform a calibration data and 
ROM check and then display the software 
version momentarily before it is ready to be 
used. 

 

Note 

In the event the calibration data and ROM check 
fails, CAL DATA FAIL will be displayed on the 
screen, as shown below. If the calibration data and 
ROM check fails, return the unit to an authorized 
GW Instek service center.  

 

Note: The CAL DATA FAIL message will remain on 
the display until it is cleared. Press any key to clear 
the error message.