Insys Modem 56k small INT 2.0 11-02-01-01-43.003 Manuale Utente

Initial Operation 

INSYS Modem 56k small INT 2.0/USB 1.0  

10 

June 06

 

      Please observe our safety instructions. 

 

a) Connecting the ground connection 
b) Connecting the power supply 10…32V DC 

INSYS MICROELECTRONICS GmbH
Internet:  www.insys-tec.de
Sales:     insys@insys-tec.de
Support: support@insys-tec.de

GND

Reset

10...32 VDC

Po
we
r

suppl
y

1

2

3

1

2

3

 

 

INSYS Modem 56k small INT 2.0 

 

 

 

INSYS Modem 56k small INT USB 1.0 

The minimum value is 10V DC. 
The maximum value is 32V DC. 

4. 

Connection with a PC 
Connect the 9-pin jack at the modem with the serial interface 
or a USB interface of your computer. 

5. 

Installation of a driver 
 
For INSYS Modem 56k small INT 2.0: 
The installation of a driver is not required when using a termi-
nal program or the HSComm.  If you use another application, a 
driver may be necessary.  Please find our current drivers at 
http://www.insys-tec.de/ or install the standard modem 336 
under Windows. 
 
For INSYS Modem 56k small USB 1.0: 
If the INSYS USB drivers are not installed on your system 

yet, you must perform the installation described in 

Chapter 4.5 . 

6. 

Communication with the Modem 

Now, start your communication program on the PC and set it 
to the used COM interface. The modem will automatically ad-
just to the baud rate of your PC.