Insys Modem 56k small INT 2.0 11-02-01-01-43.003 Manuale Utente
Codici prodotto
11-02-01-01-43.003
INSYS Modem 56k small INT 2.0/USB 1.0
Initial Operation
June 06
9
LED is red
The modem is not “off hook” (it has
not “lifted the receiver” yet) and the
DCD line at the modem is perma-
nently switched on.
not “lifted the receiver” yet) and the
DCD line at the modem is perma-
nently switched on.
4.2 Top
Terminal
Meaning
1
10..32V DC
Power supply 10V - 32V DC
2 GND
Ground
3 Reset
Reset
input
INSYS MICROELECTRONICS GmbH
Internet: www.insys-tec.de
Sales: insys@insys-tec.de
Support: support@insys-tec.de
Internet: www.insys-tec.de
Sales: insys@insys-tec.de
Support: support@insys-tec.de
GND
Reset
10...32 VDC
Pow
e
r
suppl
y
y
1
2
3
1
2
3
4 N/A
4.3 User Profiles
The modem offers a choice of profiles:
¾
Default factory setting:
The default factory settings enable you to achieve a fixed de-
fined basic state of the modem. Starting with this “basis”,
you can customize the modem according to your require-
ments.
fined basic state of the modem. Starting with this “basis”,
you can customize the modem according to your require-
ments.
¾
User profiles 0 and 1:
You can save configurations in the user profile, which may
be re-used for certain purposes.
A part of the S registry is saved in each profile. In the descrip-
tion, the affected registries are marked with an “*” in the S
registry.
be re-used for certain purposes.
A part of the S registry is saved in each profile. In the descrip-
tion, the affected registries are marked with an “*” in the S
registry.