Insys Modem 56k small INT 2.0 11-02-01-01-43.003 Manuale Utente
Codici prodotto
11-02-01-01-43.003
INSYS Modem 56k small INT 2.0/USB 1.0
AT Command Set
June 06
47
Command
Description
AT*C
Remote configuration password
This password secures the remote configuration as well as incoming data connections
(see AT*P) and security callback.
(see AT*P) and security callback.
OLD PASSWORD
Requires the old password (default: QWERTY). Wrong input leads
to ERROR.
to ERROR.
NEW PASSWORD
Enter the new password with 6 to 12 characters.
CONFIRM
Repeat the new password. Wrong input leads to ERROR.
OK
The password is immediately stored in the EEPROM.
AT&C<n>
DCD (CT109) behavior
Behavior of the RS232 DCD output of the modem.
AT&C0
DCD is always ON
AT&C1
DCD follows the carrier signal of the phone line (default)
AT+CMGF=<n>
Set the SMS dispatch format with AT+CMGS
AT+CMGF=0
Sets the PDU mode for the SMS dispatch via AT+CMGS (default).
AT+CMGF=1
Sets the text mode for the SMS dispatch via AT+CMGS (default).
AT+CMGS
SMS dispatch directly via AT command
Depending on the setting of AT+CMFG, the command AT+CMGS will have a different
syntax.
Setting AT+CMGF=1 (text mode):
syntax.
Setting AT+CMGF=1 (text mode):
AT+CMGS="phone number"
The modem returns the “>” character and awaits the SMS text (up to 160 charac-
ters), ending with an EOF character (0x1A or STRG-Z).
The modem returns the “>” character and awaits the SMS text (up to 160 charac-
ters), ending with an EOF character (0x1A or STRG-Z).
Notes:
Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
- After the sending procedure was successful, the modem will return "+CMGS: 000"
Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
- After the sending procedure was successful, the modem will return "+CMGS: 000"
Setting AT+CMGF=0 (PDU mode):
AT+CMGS=<PDU string length>
The modem returns the character “>” and awaits the PDU string, ended with an
EOF character (0x1A or STGR-Z).
Notes:
- Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
- "Numbering Plan" is ignored.
- The service center is defined by AT&Z0, the SCA field in the PDU string is ignored.
- Message header, confirmation SMS and validity period are not supported.
- Data coding scheme: Only the “default alphabet” is supported.
The modem returns the character “>” and awaits the PDU string, ended with an
EOF character (0x1A or STGR-Z).
Notes:
- Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
- "Numbering Plan" is ignored.
- The service center is defined by AT&Z0, the SCA field in the PDU string is ignored.
- Message header, confirmation SMS and validity period are not supported.
- Data coding scheme: Only the “default alphabet” is supported.
- After the sending procedure was successful, the modem will return "+CMGS:
<MR>" where <MR> is the message reference defined in the PDU string.
<MR>" where <MR> is the message reference defined in the PDU string.