Keysight Technologies USB data capturing module U2331A Input: 3 MS/s, output: 1 MS/s U2331A OPT 902 + ABD Manuale Utente
Codici prodotto
U2331A OPT 902 + ABD
Calibration
2
U2300A Series DAQ Service Guide
37
Analog Output
N O T E
Byte ordering must use LSB first.
Step 2: DAQ configuration
Send “SOUR:VOLT:POL Polarity,(@Channel)”,
Send “SOUR:VOLT”RSRC INT,(@Channel)”,
Send “SOUR:VOLT Voltage,(@Channel)”
Send “SOUR:VOLT:POL Polarity,(@Channel)”,
Send “SOUR:VOLT”RSRC INT,(@Channel)”,
Send “SOUR:VOLT Voltage,(@Channel)”
Step 3: DMM
Measure the output voltage of DAQ
Measure the output voltage of DAQ
Repeat steps above for all channels and
polarities. The test points are shown as table
polarities. The test points are shown as table
Compare the reading with
the test specification
the test specification
Step 1:
Power on DAQ device and conenct the DMM
to DAQ. Warm up for 30 minutes
Power on DAQ device and conenct the DMM
to DAQ. Warm up for 30 minutes