Linear Technology LTC2171-14 14-Bit, 40Msps, 1.8V Quad Serial ADC, 5MHz DC1525A-E Scheda Tecnica
Codici prodotto
DC1525A-E
5
dc1525af
DEMO MANUAL DC1525A
QUICK START PROCEDURE
This menu allows any of the options available for the
LTC2175 family to be programmed serially. The LTC2175
family has the following options:
LTC2175 family to be programmed serially. The LTC2175
family has the following options:
Randomizer: Enables Data Output Randomizer
• Off (Default): Disables data output randomizer
• On: Enables data output randomizer
Two’s Complement: Enables two’s complement mode
• Off (Default): Selects offset binary mode
• On: Selects two’s complement mode
Sleep Mode: Selects between normal operation, sleep
mode:
mode:
• Off (Default): Entire ADC is powered, and active
• On: The entire ADC is powered down.
Channel 1 Nap: Selects between normal operation and
putting channel 1 in nap mode.
putting channel 1 in nap mode.
• Off (Default): Channel one is active
• On: Channel one is in nap mode
Channel 2 Nap: Selects between normal operation and
putting channel 2 in nap mode.
putting channel 2 in nap mode.
• Off (Default): Channel two is active
• On: Channel two is in nap mode
Channel 3 Nap: Selects between normal operation and
putting channel 3 in nap mode.
putting channel 3 in nap mode.
• Off (Default): Channel three is active
• On: Channel three is in nap mode
Channel 4 Nap: Selects between normal operation and
putting channel 4 in nap mode.
putting channel 4 in nap mode.
• Off (Default): Channel four is active
• On: Channel four is in nap mode
Output Current: Selects the LVDS output drive current
• 1.75mA (Default): LVDS output driver current
• 2.1mA: LVDS output driver current
• 2.5mA: LVDS output driver current
• 3.0mA: LVDS output driver current
• 3.5mA: LVDS output driver current
• 4.0mA: LVDS output driver current
• 4.5mA: LVDS output driver current
Internal Termination: Enables LVDS internal termination
• Off (Default): Disables internal termination
• On: Enables internal termination
Outputs: Enables Digital Outputs
• Enabled (Default): Enables digital outputs
• Disabled: Disables digital outputs
Test Pattern: Selects Digital output test patterns. The
desired test pattern can be entered into the text boxes
provided.
desired test pattern can be entered into the text boxes
provided.
• Off(default): ADC input data is displayed
• On: Test pattern is displayed.
Once the desired settings are selected hit OK and PScope
will automatically update the register of the device on the
DC1525A demo board.
will automatically update the register of the device on the
DC1525A demo board.