Carson Electric monster truck model car 4WD RtR 2.4 GHz 500103038 Scheda Tecnica
Codici prodotto
500103038
18
GB
CV-10 NEW GENERATION
Steering servo
Tools Needed for the Assembly
Scissors
30 001 3305
Needle nose pliers
30 007 4034
Side cutter
30 007 4035
Modelling knife
30 007 4053
Hexagonal wrench
30 001 3118
Philips screwdriver (small and big)
and hex-wrench
1.5/ 2 / 2.5 mm
and hex-wrench
1.5/ 2 / 2.5 mm
30 007 4023
Instant adhesive
30 005 3339
Tweezers
30 007 4003
Please read the instructions provided with your radio system before
using it.
using it.
The servos must be set at the centre position before installation. To set
the servos at a neutral position, turn on the transmitter and receiver.
Set the trim levers in the centre position and turn off the receiver, and
then the transmitter. The servos will be in proper neutral position for
installation.
the servos at a neutral position, turn on the transmitter and receiver.
Set the trim levers in the centre position and turn off the receiver, and
then the transmitter. The servos will be in proper neutral position for
installation.
Receiver antenna
Batteries for receiver
Engine throttle
servo
servo
Switch
a. Your Radio System
(only for RTR version)
sion)
Transmitter