ALIGN RH45E13X Scheda Tecnica

Notes on the assembly instructions:

• The basis of the brief texts in the German instructions is the English instructions for the appropriate model, in which you will also

find the relevant illustrations.

• The texts follow the sequence of these instructions, but do not constitute a literal translation.

• The stated page numbers refer to the English instructions.

• All the pushrod and servo output arm lengths stated in the instructions only apply if Align servos are used.

• If you prefer to use other makes of servo, you may have to alter the stated dimensions slightly.

• The Align building instructions are divided into sub-assemblies, each of which is sub-divided into individual stages arranged in a

logical

sequence.

• At the start of each stage you will see a multi-digit number; this number always corresponds to the appropriate bag number in

the kit.

• The assembly drawings are very useful in explaining each stage of assembly. To help you identify them, all the small items

required are illustrated separately, together with their dimensions.

Notes on replacement parts

• It is particularly important to use genuine spare parts exclusively.

• Spare parts are only available in the sets stated in the Replacement Parts List.

• Please keep this assembly manual in a safe place in case you need to refer to it later for re-assembly work or repairs.

• To ensure that spare parts are delivered swiftly and without complication, it is essential to use the original Order Number when

placing your order.

• If you urgently need a spare part which your model shop does not have in stock, you can obtain all replacement parts quickly

and simply direct from robbe. Please refer to the current Price List for details of the procedure.

The address is as follows:

robbe Modellsport GmbH & Co. KG

Express Spares Service (ESD)

Metzloser Str. 38

D-36355 Grebenhain

Telephone: 06644-87333

Fax: 06644-87339

If you have a complaint or wish to make a claim under guarantee, please note that it is essential to provide proof of

purchase (receipt), and state the serial number.

General notes

Take care only to open those bags which contain the parts required for the stage in hand, and place the contents in a suitable

container. Assembly commences with the main rotor head. Check that all moving parts move smoothly but without lost motion

(slop). Tighten screws cautiously; overtightening may strip the threads.

Various symbols are used repeatedly throughout these instructions:

CA: use cyano-acrylate glue here.

T22 / T43: use thread-lock fluid here.

R48: use metal-lock fluid here

OIL/Grease: use grease here (robbe No. 5532)