Renkforce SATA harddrive casing 2.5 " HY-EB-2509-U3 USB 3.0 HY-EB-2509-U3 Manuale Utente
Codici prodotto
HY-EB-2509-U3
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2014 by Conrad Electronic SE.
© Copyright 2014 by Conrad Electronic SE.
V2_0714_02-JH
Partitioning/formatting your hard drive
• For Windows® operating systems, you can use the control panel for partitioning
and formatting.
• When using Windows® 7, for example, open “System and security” from the control
panel. Click on “Management” and then on “Creating hard drive partitions”. Select
the respective hard drive and create a new partition.
• Then format the new partition. Quick formatting is sufficient in such a case.
Performing a normal formatting procedure can take a very long time to complete
depending on the hard drive capacity.
• Contact an expert if you have any doubts regarding partitioning/formatting.
Tips and notes
a) USB 3.0
• USB 3.0 devices are downwardly compatible. That means that the product with
the installed hard drive can also be connected to common USB 2.0 ports or slow
USB 1.1 ports. The transfer speed will be reduced accordingly, though.
• Ideally, USB 3.0 makes speeds of over 100 Mbyte/s possible depending on your
computer‘s hard drive, the hard drive mounted in the casing, and the USB 3.0
controller.
• Using a common USB 2.0/1.1 cable instead of the included USB 3.0 cable will reduce
the transfer rate.
• If you want to connect the product via a USB hub, the USB hub has to support
USB 3.0 for the maximum transfer rate to be possible.
b) General
• When turning on the hard drive case, the blue LED lights up. The LED starts flashing
when reading/writing operations access the hard drive.
• Please note that if disconnecting the connection cable during data transmission
files could be damaged or the operating system could shutdown. First safely remove
the hard drive through the operating system before disconnecting the connection
cable.
• Always handle hard drives very carefully. Impacts during operation and even for
several seconds after switching off the product can cause the reading/writing
heads to touch the magnetic discs, which in turn could damage the hard drive.
• When connecting the hard drive for the first time, it could take approx. one minute
for the hard drive to be recognized. The length of this time period varies depending
on the operating system.
• Windows® XP and older Windows® versions will not recognize hard disks with a
capacity of >2 TB.
Maintenance and cleaning
Do not use any aggressive cleaning agents as these may lead to
discoloration.
To prevent scratch marks, do not apply too much force on the surface
To prevent scratch marks, do not apply too much force on the surface
during cleaning.
• Disconnect the product from the operating system before cleaning. Wait for at least
30 seconds until all magnetic discs have come to a complete stop. Disconnect the
USB cable from the product.
• Besides occasional cleaning, the device is maintenance-free. To clean the device,
use a soft, anti-static and lint-free cloth.
• You can use a clean, long-haired brush and a vacuum cleaner to easily remove any
dust.
Disposal
Electronic devices are recyclable waste and must not be disposed of in the
household waste.
At the end of its service life, dispose of the product according to the
At the end of its service life, dispose of the product according to the
relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of
You thus fulfil your statutory obligations and contribute to the protection of
the environment.
Technical data
Operating voltage................................5 V/DC (via USB)
Suitable for ........................................... 6.35 cm/2.5“ SATA I/II/III HDD/SSD
Suitable for ........................................... 6.35 cm/2.5“ SATA I/II/III HDD/SSD
of 5/7/9.5/12/14.5 mm in height
System requirements ......................... Windows® 2000, XP (Home, Pro, with SP1, SP2,
SP3, only 32 bit), Vista™ (32/64 bit), 7 (32/64 bit), 8,
8 Pro
Mac OS 9.0 and later
Linux Ubuntu 2.4.18 and later
Mac OS 9.0 and later
Linux Ubuntu 2.4.18 and later
Hard drive capacity ............................max. 4 TB
USB standard.......................................USB 3.0 (downward compatible to USB 2.0/1.1)
USB cable length ................................approx. 63 cm
Operating conditions ..........................0 to +70 ºC, 10 – 90 % RH
Storage conditions..............................-10 to +75 ºC, 5 – 95 % RH
Dimensions (W x H x D)......................135 x 85 x 18 mm
Weight ...................................................104 g
USB standard.......................................USB 3.0 (downward compatible to USB 2.0/1.1)
USB cable length ................................approx. 63 cm
Operating conditions ..........................0 to +70 ºC, 10 – 90 % RH
Storage conditions..............................-10 to +75 ºC, 5 – 95 % RH
Dimensions (W x H x D)......................135 x 85 x 18 mm
Weight ...................................................104 g