Axis 209MFD network camera M12 in 10-pack/bulk 0295-021 Manuale Utente

1. Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to 

remove any dust from the lens.

2. To absorb any moisture in the 

AXIS 209FD-R/AXIS 209FD-R 
M12/AXIS 209MFD-R/AXIS 
209MFD-R M12, remove the 
supplied silica gel sachet (dry 
bag) from the plastic bag and 
affix inside the cover, behind 
the dome.

3. You can replace the cover in 

either of these two ways:

• Replace cover and gently 

tighten the tamper-proof 
screws by hand using 
the supplied allen key. In 
the AXIS 209FD-R/AXIS 209FD-R M12/AXIS 209MFD-R/AXIS 209MFD-R M12, 
take care not to pinch the gasket. 

• Replace cover and tighten the tamper-proof screws with torque screwdriver 

(torque<0.4 Nm).

The installation is now complete.

Once installed, your AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 is accessible on 
your local network (LAN). To access the camera from the Internet, network routers must be 
configured to allow incoming traffic, which is usually done on a specific port. Please refer to 
the documentation for your router for further instructions. For more information on this and 
other topics, visit the Axis Support Web at www.axis.com/techsup

Affix dry bag here.